Correct Operation of Magnetic Separators Means Much

To realize the smooth operation of the magnetic separator needs users to be careful about the security of the equipment. The related operation procedures of the magnetic separator include the start-up, shut-down and fault treatment of the magnetic separator as well as the control of the interrupted feeding process.

According to the experts from our company, in the continuous magnetic separation procedure, most devices are start in the countercurrent direction of the minerals and are shut down in the fair current direction in order to avoid the mineral overflowing or blocking. When errors occur, the whole set of machines will give signals to remind the operators so that they can hurry to prevent the accident.

When using the magnetic separator for the ore beneficiation process, we need to follow the right instruction and operate the equipment according to the right order as follows:

1. The magnetic separator is powered on to be initiated or excited.

2. The ore pulp is fed to the magnetic separator so that they can be classified and separated.

3. When finishing feeding minerals, the ore pulp is returned to the mixing tank.

4. Turn off the exciting power to remove the magnetism.

5. Discharge the magnetic minerals from the magnetic separator and repeat the above procedures periodically.

The right operating order of the magnetic separator can be controlled by the special controller and it can be written as a computing program in order to save the users’ time and labor.